Return to Uncreativelabs.net front page Uncreative Labs
PC XT and AT forums
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

 486 hateway 2000 486sx025 refurb View next topic
View previous topic
Post new topicReply to topic
Author Message
wdegroot



Joined: 03 Feb 2006
Posts: 487
Location: pennsylvanai

PostPosted: Sun Aug 26, 2012 6:41 pm Reply with quoteBack to top

refurb may be a misnomer., I did not take things apart and paint them
I first wanted a pc to test 72 pin ram
a 486 will work with one stick. a pentium requires two.
the chips in this system are accessible.
this is a compact unit with everything on the motherboard.
after searching and basically finding nothing
I first fould a site talking aboth angina ?? mb and also intel and micronics.
apparently mine is an intel mb.
somehow in the last few weels the ide contror
failred. I was able to get an old maxtor card doing the job.. I upgraded the cpu and someone sent me jumper settings and I changed the clock from 25 to 33. so instead of 35 than 48, it now runs at 66.
ram is limited to 32m.( 2 slots) and drives to 528,
I have an eide max from promise but no manual.
I cannot make it work.
but I am waiting for the manual.
I do not think there are other enhanced
( isa) controllers
I am told the origina;l ide port will HANG if a cd drive si attached.
like pulling nails with bare hands. but it is working.
If you have one of these I have the docs for the intel mb.
View user's profileSend private messageSend e-mail
Display posts from previous:      
Post new topicReply to topic
 Jump to:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001/3 phpBB Group :: FI Theme :: All times are GMT