Return to Uncreativelabs.net front page Uncreative Labs
PC XT and AT forums
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

 Compaticard IV problem View next topic
View previous topic
Post new topicReply to topic
Author Message
IBM Portable PC



Joined: 23 Dec 2007
Posts: 60
Location: Melbourne, Australia

PostPosted: Fri Nov 22, 2013 6:35 am Reply with quoteBack to top

I can CCFORMAT D: /S successfully, and read the disks on other PC's.

However, I cannot DIR or copy files to drive D:

PCDOS 7, DRDOS 6 & MSDOS 622 display "no files" i.e. an empty disk.

When I try and write, they report disk full.

I do not understand how I can CCFORMAT /S and not DIR?

I am using the NOROM option.
View user's profileSend private message
wdegroot



Joined: 03 Feb 2006
Posts: 487
Location: pennsylvanai

PostPosted: Wed Oct 08, 2014 4:09 am Reply with quoteBack to top

many yeard ago dos 3,10 or later. the 386025 was the toip pc.
it uses a driver so no bios on the card.
My memories are not sharp. do you have a manual or info describing the drivers in configh,sys/
remeber dos 6.22 had a 2038 ( 2g likit) with win 311 running under dos 3.11 I used 4gb drives with 2-02g partitions. I never at that timnehad a larger drive.
this applies to IDE. mfm/rll drives topped out aT 80MFM AND 140?> RLL.
ESDI DRIVES TOPPED OUT AT 660 BUT THE PARTITION SIZE LIMIT WAS TH DOS VERSION.
i know A COMPATICARD IT A FLOPPY-ONLY CARD,. BUT ARE THE HARD DIVES CONFIGURED PROPERLY/
DO THEY WORK WITH THGE at ( IBM 286 AT) 1,2 M FLOPPY?

i REALIZE THIS IS AN OLD POST AND i HOPE YOIU HAVE SOLVED THE PROBLEM.
View user's profileSend private messageSend e-mail
Display posts from previous:      
Post new topicReply to topic
 Jump to:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001/3 phpBB Group :: FI Theme :: All times are GMT