Author |
Message |
Tadryn
Joined: 18 Apr 2006
Posts: 6
Location: France
|
Posted:
Tue Apr 18, 2006 8:41 pm |
  |
Hello !
I found this card :
It's only labelled with PE-520. There is no mention of the manufacturer, nor the FCC ID.
I googled and found this link :
http://www.peteweb.com/ftp/mirrors/hardware_specs/i/U-Z/50495.htm
But I can't find any driver for this piece, that would be fine in my 286.
Have you informations about this card ? |
|
|
  |
 |
ryan

Joined: 19 Apr 2006
Posts: 261
Location: WisConSin
|
Posted:
Wed Apr 19, 2006 8:37 pm |
  |
So long as the jumpers on the card are set correctly for the amount of ram installed it should work just plug and play (and then set your mobo jumpers if nec)
Good Luck
Ryan |
|
|
   |
 |
Tadryn
Joined: 18 Apr 2006
Posts: 6
Location: France
|
Posted:
Wed Apr 19, 2006 10:16 pm |
  |
Thanks a lot, I'll try tomorrow.  |
|
|
  |
 |
|